Waste reduction in barwon dining chair production process using the failure mode and effect analysis (fmea) method on CV. Valasindo Sentra Usaha
Main Article Content
Bambang Suhardi
Femilia Setya Puji Hastuti
Wakhid Ahmad Jauhari
Pringgo Widyo Laksono
The furniture industry has a vital role in economic growth in Indonesia by one of the activities that are international trade. During the last year, the export value of the furniture industry has increased. It can make an increase of industrial competition in the global market. Therefore, production efficiency needs to be improved under the four pillars that affect global market competitiveness. This study focuses on the Barwon Dining Chair sub-product because it has the most and constant demand with an average demand is 57 units per month while the company experiences delay until 88% with an average delay of 14 days. Determination of Value Added (VA), Non-Value Added (NVA), and Necessary Non-Value Added are used to describe the current Value Stream Mapping (VSM) as an explanation of the production process flow. Failure and Effect Analysis (FMEA) is used to identify a system with the risk of failure and its consequences by giving values from severity, occurrence, and detectability and generating the largest number of RPN assembly stations at 45. The improvements are warehouse rack design and the box at the assembly station, reducing the time to approximately 2 minutes.
Alfiansyah, R & Kurniati, N. (2018). Identifikasi waste dengan metode waste assessment model dalam penerapan lean manufacturing untuk perbaikan proses produksi (studi kasus pada proses produksi sarung tangan). Jurnal Teknik ITS, 7(1), 165-170.
Ariani, D. W. (2004). Pengendalian kualitas statistik. Yogyakarta. Indonesia: ANDI Yogyakarta.
Arliana, A. G., & Soebroto, A. A. (2018). Sistem pendukung keputusan kelompok untuk penilaian kinerja unit perusahaan menggunakan metode topsis dan borda (studi kasus : perum jasa tirta 1 malang). Jurnal Pengembangan Teknologi Informasi dan Ilmu Komputer, 2(12), 7348-7356.
Asosiasi Mebel dan Kerajinan Indonesia (AMKRI). (2015). “Roadmap Industri Mebel dan Kerajinan Indonesia “Target Pencapaian Ekspor 5 Milyar USD” dalam Bunga Rampai Info Komoditas Furnitur”. Badan Pengkajian dan Pengembangan Perdagangan. Jakarta. Indonesia
Badan Pusat Stastistik .(2019). “Buletin Perdagangan Luar Negeri Menurut Kelompok Komoditi dan Negara Januari 2019”. BPS RI: CV. Josevindo. Indonesia.
Carlson, C. S. (2014). Understanding and applying the fundamentals of FMEAs. Arizona: ReliaSoft Corporation.
Chen, L. & Meng, B. (2010). The application of value stream mapping based lean production system. International Journal of Business and Management, 5(6), 203-209.
Eswaramurthi, K. & Mohanram, P. V. (2013). Value And Non- Value Added (VA/NVA) activities Analysis of An Inspection Process - A Case Study. International Journal of Engineering Research & Technology, 2(2),1-5.
Gasperz, V. (2002). Total quality management. Jakarta. Indonesia: PT. Gramedia Pustaka Utama.
Harish, K. A., & Selvam, M. (2015). Lean waste: a study classification from different categories and industry perspectives. The Asian Review of Civil Engineering, 4(2), 7-12.
International Trade Centre (ITC). (2004). “International Wooden Furniture Markets”. Geneva: International Tropical Timber Organization.
Intifada, G.S. & Witantyo. (2012). Minimasi waste (pemborosan) menggunakan value stream analysis tool untuk meningkatkan efisiensi waktu produksi. (studi kasus PT. Barata Indonesia, Gresik). Jurnal Teknik POMITS, 1(1), 1-6.
Muhsin, A., Djawoto., Susilo, P. & Muafi. (2018). Hospital performance improvement through the hospital information system design. International Journal of Civil Engineering and Technology, 9(1), 918-928.
Noerfajr, L. & Suliantoro, H. (2016). Usulan perancangan tata letak gudang dengan menerapkan sistem management warehouse di PT. Sandang Asia Maju Abadi. Industrial Engineering Online Journal, 5(4), 1-7
Puspitasari, N. B. & Martanto, A. (2014). Penggunaan FMEA dalam mengidentifikasi resiko kegagalan proses produksi sarung atm (alat tenun mesin) (studi kasus PT. Asaputex Jaya Tegal). J@ti Undip : Jurnal Teknik Industri, 9(2), 93-98.
Ratri, E. M., Gusminto, E. B., & Singgih, M. (2018). Peningkatan kualitas produk roti manis pada PT. Indoroti Prima Cemerlang Jember berdasarkan metode statistical process control (SPC) dan failure mode and effect analysisi (FMEA). E-Journal Ekonomi Bisnis dan Akutansi, 5(1), 200-207.
Ririh, K.R., Sundari, A.S. & Wulandari, P. (2018). Analisis risiko pada area finishing menggunakan metode failure mode effect and analysis (FMEA) di PT. Indokarlo Perkasa. Seminar Rekayasa Teknologi Semrestek, 631-640.
Setiawan, A. (2017). Pengurangan waste proses produksi tiang penerangan jalan umum pada CV. X dengan pendekatan value stream mapping. Institut Teknologi Sepuluh Nopember. Surabaya. Indonesia
Siregar, M.Tirtana. & Pitaloka, N. W. A. (2018). Lean distribution untuk minimasi keterlambatan pengiriman produk susu. Jurnal Manajemen Transportasi & Logistik, 5(3), 265-276.
Suhardi, B., Anisa, Nur. & Laksono, P. W. (2019). Minimizing waste using lean manufacturing and ECRS principle in indonesian furniture industry. Cogent Engineering, 6, 1-13.
Suhardi, B., Sari, A.P. & Laksono, P.W. (2016). Implementation of standardization work to improve productivity in indonesian furniture industry. Journal of Engineering and Applied Sciences, 11(12), 2602-2606.
Parsana, T. S., & Panel, M. T. (2014). A case study: a process FMEA tool to enhance quality and efficiency of manufacturing industry. Bonfring International Journal of Industrial Engineering and Management Science, 4(3), 145-152.
Wilson, L. (2010). How Implementation Lean Manufacturing. New York: McGraw Hill.
Bambang Suhardi , Sebelas Maret University, Indonesia
Department of Industrial Engineering, Sebelas Maret University
Femilia Setya Puji Hastuti , Sebelas Maret University, Indonesia
Department of Industrial Engineering, Sebelas Maret University
Wakhid Ahmad Jauhari , Sebelas Maret University, Indonesia
Department of Industrial Engineering, Sebelas Maret University
Pringgo Widyo Laksono , Gifu University, Japan
Mechanical and Civil Engineering, Gifu University
